I found an amazing trick which helps you to prevent the internet from disconnecting while downloading.
Many people have this problem, including me that the internet disconnects while downloading. To activate this trick, you have to make some changes in the router.
(Click on the images to enlarge them)
—————————————————————————————
- turn on the modem and open the browser (without connecting to the internet)
- type 192.168.1.1 in the address bar of the browser and press enter.
- A small dilogue box for username and for the password will open.
- Enter the username as “admin” and password also “admin“.
- The modem’s control panel will open.
- Click on the setup or advance setup link and select WAN.
- A list with many connections will appear.
- Click on the checkbox of each connection and click on Remove button. this will delete all the existing connections.
- Then click on the Add button to add a new connection manually.
- Then click on ‘Next’ button to proceed with next step.
- Select the type of network protocol as PPPoE and click on Next button.
- In this window, type your internet username and password correctly, And click on Next button.
- Then in the next window, check mark the checkbox of “Enable WAN services” and click next.
- After this step, Your new connection changes will be displayed to confirm. Check them all as given below. Click on Save button to save the current changes.
- Now you are done! Your new connection will be added as default one.
- This is the last step for enabling this service. Now click on “Save and reboot” button. This will restart the modem and load with the new settings on every startups.
Now open any website without connecting to the internet, i.e. without ‘dial-up’ usually named as ‘broadband’ or ‘Bsnl’ or ‘Data one’.
You will notice all the LED lamps of the modem will glow, except the USB or Ethernet as you need not to connect the modem with the both. Now you are able to surf the internet without any disconnection. It will not disconnect while you are downloading stuff at maximum speed…
If you are having any problem in surfing the internet after the stepwise installation, try to use different web-browsers.
If you want to make the changes as they were before this, simply press the reset button on the back of the modem with the help of any pin or sharp object, your all settings will be restored!
Try this trick and don’t forget to leave a comment after your try.












October 21st, 2008 at 2:15 am
Thanks for the tip. I was having this problem when i was used to have BSNL connection.
November 15th, 2008 at 8:33 am
I’m very happy that this trick worked for me.
Thanks a lot aaaaaashih for this as I used to get fed up with the disconnection during download especially during the nights when I put a download and go to sleep.
IS THERE ANY HACK TO INCREASE THE SPPED OF THE BROADBAND CONNECTION. IM USING THE 750 UNLIMITED PLAN
June 3rd, 2009 at 5:48 am
thanks man ive done it hope it wont get disconnected agin….thanks
June 8th, 2009 at 2:43 am
thnx dude i had reset my modem settings according to ur suggestions and now i hope that it works.
June 12th, 2009 at 10:33 am
its not working for me
im using firefox n IE both of them shows error(offline for firefox n page not found in IE) while i tried to enter the page address u gave(192.168.1.1)
please send ur reply to my id given above
im having this problem for 6 months
June 12th, 2009 at 9:01 pm
Friend, Try the same with different PC. Say for your friend’s. Same was the case with one of my friend. Then he came to me with fis modem, and I configured it from my PC. Try it from another pc, it will work.
No need to attach phone line to modem, Just switch on the modem, and try the above.
June 25th, 2009 at 1:31 pm
kool man
this is the best ( if not the only ) solution available on net
ur the best, dude !
this totally works !!!
thanks a lot
i think u should publish this thing on other forums as well ,coz a lot of people r having these problems.
again, ur the best !
June 29th, 2009 at 8:53 am
@ Deep Bandesha
Thanks friend
August 12th, 2009 at 10:40 am
Hey!! My modem is a UT-300r2u so the settings as well as the interface is really quite different.Please let me know what I can do to solve this problem as I am really gettin annoyed with the constant disconnections.
August 19th, 2009 at 1:28 am
it’s still not working 100% successfully. still thanks
September 17th, 2009 at 4:15 am
thanks i will .
October 29th, 2009 at 1:33 am
This is a nice trick, i have tried it but not succeed, i m using WA300A router. please help
November 2nd, 2009 at 6:08 pm
Hello dude u r cyber lord
Thank qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Amazing^infinity for ur knowledge!!
dont know how to thank u.This is all i can say
This stuff really works(OhhhOOO).
Bye
December 28th, 2009 at 8:19 am
you havent told which type of modem .It doesent work on my modem Im using HUAWEI MT882 type of modem.
February 17th, 2010 at 11:18 am
thanks Ashish !!
your tip appears to work
April 29th, 2010 at 9:54 am
U r the BEST dude.hands down
May 10th, 2010 at 1:58 am
but there is a problem dude…. it will charge net usage if we set the computer to hibernate mode… is there any way to turn on the computer unless its in hibernate mode?? I’m in 500c plan and i would like to turn on computer @ 2.05AM….
August 5th, 2010 at 6:24 am
Thx man..
Trust it works..
Gr8 help